AutoCAD Forum. Turn on suggestions. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. Showing results for. Search instead for. Did you mean:. This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations.
Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.
Back to Topic Listing Previous Next. Filter by Lables. Failure while chamfering. Message 1 of 7. Press it again to reset default AutoCAD interface. You can use this palette to modify most of the properties of the object too. You can also use PR command to open the property palette. You can use it to open design center palette which contains many AutoCAD blocks that can be used directly in your drawing.
You can use this keyboard shortcut to toggle the visibility of the command line. If for some reason your command line is hidden from the drawing area, then use this keyboard shortcut to bring it back. To paste the copied objects of the clipboard in the drawing keeping their original properties, you can use this keyboard shortcut.
To paste the copied objects as a block you can use this keyboard shortcut, the block thus created will have a random set of characters as is name. You can use this keyboard shortcut to make blocks quickly without going through the create block window.
This keyboard shortcut can be used to undo last action in your drawing. You can press this shortcut key multiple times to undo many actions. The status bar is an important feature of AutoCAD user interface and its tools are required quite frequently while making or editing your drawing hence they are available on the status bar for easy access.
You can activate or deactivate status bar icons using keyboard shortcuts, commands or by clicking on their respective icon. In this section, I have listed the most frequently used status bar options along with their properties and uses. This status bar tool will toggle the visibility of background grid which is often visible in your drawing area.
Toggle Snap mode, when snap mode is active AutoCAD cursor will jump to specific points in the drawing area which is defined in snap mode. By default the value of this system variable is set to -3 which keeps it off you change this system variable to 3 to make dynamic input active. Dynamic input allows you to add information dynamically on the cursor tooltip. When ortho mode is on you can make lines either horizontally or vertically only. With polar tracking active you can make lines inclined to any angle which is defined in the polar tracking increment angle.
Using this toggle you can activate the isometric drawing plane in AutoCAD. You can also toggle between different isoplanes using F5 function key. Using this option you can track snap points of geometries like center, midpoint, endpoint etc and make geometries with their reference.
One the most important status bar toggles. This option allows you to make precise AutoCAD drawings. This system variable toggles the visibility of lineweight in a drawing. The default value of this system variable is OFF which keeps the lineweight display off you can change its value to ON to keep lineweight visible in the drawing area.
Just like lineweight this status variable allows you to toggle the visibility of transparency of an object. You change the value of this system variable to 1 to make transparency visible or 0 if you want to make it invisible. Using this system variable you can select overlapping objects very easily. When the value of this system variable is set to 2, an overlapping icon and a menu containing a list of overlapping objects appear and you can select the required object from this list.
If you set the value of this system variable to 1, only the overlap icon appears not the menu. You can turn this off by changing the value of this system variable to 0. Dynamic UCS can be activated or deactivated using this function key. Using this status bar option you can open Graphics configuration window which is used to change settings related to display and graphics properties of AutoCAD.
These are some of the commands which can be frequently used in your drawing workflow to improve your overall efficiency. You might be familiar with many of these commands but there are also some commands which are really helpful still they remain largely unused. This command is useful for counting the number of blocks in your drawing.
It reports the number of each instance of block used in the drawing along with its name. To count the block it should be visible in the drawing area. Using this command you can convert single line as well as multiline text into geometries. Using this command you can make infinite lines starting from the point of selection. When you trim or break this infinite line to a finite length it becomes a simple line geometry. This command makes a single point geometry in the drawing.
To modify the type of point created by this command you can use PTYPE command and choose the desired point type from Point Style window. Using this command you can make a revision cloud geometry by freehand sketching. You can make a freehand sketch using this command. You can use Line, Polyline or Spline as the object type for making this freehand sketch. To cancel repetition of command press ESC key.
Use this command to copy nested objects from a block or Xref without exploding them. Using this subcommand you can perform calculations directly on the AutoCAD command line even when you are in the middle of a command. Explodes the block containing attributes retaining the attribute setting and its layer definition. This is especially helpful if you want to retain the text of attribute after exploding the block. Using this command you can check the spelling of selected text and correct the spellings from Check Spelling window.
This command can be used to write arc aligned text in AutoCAD. You can use this command to even write text aligned to a circle. More about this command can be found in this related article.
This command can be used to restore the last deleted object in your drawing. After deleting an object if you made many other changes in the drawing and realized that you might need to restore the deleted object then simply type OOPS and press enter.
This command can be used to change the space of an object from model space to paper space and vice versa. See the animated image shown below for reference. You can use this command to divide any 2D geometry into many equal parts.
At each point of division, a point geometry will be added on the 2D curve. If you need to rename any named object like layer, block or linetype simply use this command to rename it. This command can be used to break 2D geometries at one or two points. It is helpful if you want to break a curve at the point of intersection with other curve or if you want to create a gap by breaking a part of the geometry.
Using this command you can find a lot of information about your drawing like the date when the drawing was created and total editing time consumed on the drawing. This command can be used to make the selection from your drawing with filters. As an example, you can use quick select to make a selection set containing all circles of the drawing with the radius of a particular value.
It can be used to find the distance between two points in the drawing. You can paste the copied objects from clipboard to your drawing using this command. Using this command you can find lots of properties of an object like the layer they are on, area, length or radius, perimeter or circumference and a lot more. To use this command simply type LIST on the command line then press enter and select the object from drawing area about which you want to know and press enter again. This command was introduced in AutoCAD version and it can be used to make most of the dimensions like Linear, aligned, radius, diameter and baseline.
If you want to add a feature control frame representing tolerance related information in your drawing then you can use this command. Using this command you can change the scale of existing Text or Mtext object in the drawing.
When the scale of these text entities are changed the base point will remain fixed. Using this command you can change the base point of a drawing without changing its origin. This is especially helpful in the situation where you want to insert the drawing into another as a Xref. By default, AutoCAD takes origin as the base point which can be modified using this command without changing the origin.
Using this command you can change the text justification of Text and Mtext elements in the drawing. Using this command you can set the drawing units and other settings like the precision of linear and angular dimensions and default rotation angle.
Using this command you can make a multiline geometry which contains multiple parallel lines. How to create a linetype in autocad ? How to make new linetype in autocad? How to create linetype in autocad ? How to create new linetype in autocad ? Related Articles. How to give dimensions in isometric autocad? How to read area in autocad? How to stretch an object in autocad ? How to dwg sheets in autocad? How to draw triangle in autocad?
When autocad mac with keyboard? How to convert jpg to vector in autocad?
0コメント