Install images are the operating system images that you deploy to the client computer. You can also use the Install. To add the default images, use the following procedures. After you have a boot image and an install image on the server, you can perform a PXE boot on a client computer to install an operating system. Browse to choose the default boot image Boot.
Click Open and then click Next. Follow the instructions in the wizard to add the image. To add the default install image included on the product installation DVD 1. Specify a name for the image group, and then click Next.
Browse to select the default install image Install. To add a subset of the images included in the Install. You should add only the images for which you have licenses. Follow the instructions in the wizard to add the images. Now that you have a boot image and an install image on the server, you can perform a PXE boot on a client computer to install an operating system. Configuring the boot menu Boot images are the images containing Windows PE that the client boots into to select the image to install.
When you have multiple boot images available to client computers, the clients will be presented with a boot menu that displays the boot images. Users will first have to select a boot image, and then the install images will be displayed. The boot menu enables you to have boot images for different tasks and architecture types.
In addition, xbased computers can run xbased or xbased boot images. Therefore, for each of these tasks, you could have two boot images — one for x86 and one for x The boot 13 menu on xbased computers will display only x86 boot images because xbased computers cannot run x64 boot images.
Note The default behavior is for xbased computers to display both xbased and x64based boot images when both are available. For detailed information, see the Managing the Boot Menu[role] topic. This is because of a limitation in the number of characters displayed within the operating system loader boot menu. This file can contain only letters and numbers. If you use the version of Windows Vista that does not contain SP1, then multicasting will not work correctly.
This issue pertains to localized strings. Limitations within the BIOS character sets prevent the characters from being displayed properly. Steps for configuring the boot menu The following procedures explain how to add more boot images to the boot menu. To add an additional boot image by using the Windows interface 1. Click Browse to locate the boot image that you want to add.
The boot image must be located on the server, and it can be the same or a different architecture. Follow the instructions in the wizard to add the boot image. When you have completed this procedure and you perform a PXE boot on a client computer, a boot menu will appear that shows both images if both apply to that computer.
To add an additional boot image at a command prompt 1. Open an elevated Command Prompt window. Click Start, right-click Command Prompt, and then click Run as administrator.
The image can be the same architecture or a different one. You can now make additional changes to the boot menu, using the Bcdedit. Creating custom install images With Windows Deployment Services you can create custom install images. You can also modify images to add files, drivers, and so on by using the tools in the Windows AIK.
The processes for these operations are similar for boot images and install images, but the tool sets and syntax vary between the two image types. For more information, see the Creating Images topic. To create an install image, you must first create a capture image. Known issues when creating custom install images When you boot into the capture image, the image capture wizard will start.
If you do not run Sysprep on the computer before you boot into the image, you will not see any drives to capture. This requirement is enforced to avoid image corruption if there is a network malfunction. Steps for creating a capture image To create an install image, you must first create a capture image.
Capture images are boot images that you boot a client computer into to capture the operating system into a. These images provide an alternative to the command-line utility, ImageX. Except in advanced scenarios, you can create a capture image by using the Boot.
You can also use the WinPE. Use one of the following procedures to create a capture image. To create a capture image using the Windows interface 1.
Right-click the image to use it as a capture image. In most cases, you can just use the Boot. Click Create Capture Boot Image. Type a name, a description, and the location where you want to save a local copy of the file. You must specify a location in case there is a problem with the network when you deploy the capture image. Continue to follow the instructions in the wizard, and when it is complete, click Finish.
Right-click the boot image folder. Click Add Boot Image. Browse and select the new capture image, and then click Next. After you have created the capture image, follow the instructions in the Installing an install image section to boot a client computer into the capture image and capture the operating system. To create a capture image at a command prompt 1. Steps for creating an install image Now that you have a capture image, you need to prepare the reference computer and then create the install image.
The reference computer can be a computer with a standard Windows installation or a Windows installation that has been configured for a specific environment. First, you boot a computer which has been prepared with Sysprep into the capture image.
Then a wizard creates an install image of the reference computer and saves it as a. After that, you can deploy the. To create a custom install image 1. Create a reference computer install the operating system, applications, and make any other changes that you want. Ensure that you have the correct version of Sysprep. If you prefer, you can also use the Sysprep graphical user interface by double-clicking Sysprep.
When the computer restarts, perform a network boot on the computer by pressing F In the boot menu, select the capture image that you created in the preceding procedure, and then click Next.
Choose the appropriate drive, and then provide a name and description for the image. Click Next to continue. Important You will see only drives that contain operating systems prepared with Sysprep.
If you do not run the command in step 4, you will not see any drives to capture. Click Browse and then browse to a local folder where you want to store the captured 17 install image. Important You must enter a local location to save the new image; otherwise, you will not be able to capture the image. Type a name for the image, using the. Important You must use the. Select Upload image to WDS server.
Type the name of the Windows Deployment Services server, and then click Connect. If prompted for credentials, provide a user name and password for an account with sufficient permissions to connect to the Windows Deployment Services server. In the Image Group list, select the image group in which you want to store the image.
Click Finish. Creating discover images Discover images are boot images that you can use to install an operating system on a computer that is not PXE enabled. The discover image on the media locates a Windows Deployment Services server, and the server deploys the install image to the computer.
You can configure discover images to target a specific Windows Deployment Services server. This means that if you have multiple servers in your environment, you can create a discover image for each one, and then name them based on the name of the server. After you create the discover image, create media that contains the image.
You must create discover images by using the Boot. Workstation Configuration Overview. Follow the Setup instructions below to install Windows Professional on a workstation. For additional help, see Windows Professional Online Help. Note : This guide assumes you are installing Windows Professional on a machine with no pre-existing version of Windows.
If you are upgrading from a previous version of Windows, some of the steps may differ. Refer to the Getting Started instructions you received with your copy of Windows Professional. To verify or change the boot sequence, run the Setup program native to your machine. Adding The Workstation to The Domain.
The example company, organization, products, people, and events depicted in this step-by-step guide are fictitious.
No association with any real company, organization, product, person, or event is intended or should be inferred. This common infrastructure is designed for use on a private network. The fictitious company name and DNS name used in the common infrastructure are not registered for use on the Internet. Please do not use this name on a public network or Internet. For the most accurate information please visit the official site. Return To The Windows Section.
ActiveWin: Win Support Center. Windows Windows Me. Windows Server Windows Vista. News Search. Xbox News. You capture the image from a template computer using Sysprep, and deploy the image on client computes. AT least two types of images are needed to be added in Windows Deployment Services in this tutorial install.
Like this: Like Loading Leave a Reply Cancel reply Enter your comment here Fill in your details below or click an icon to log in:. Email required Address never made public. Name required. Menu Menu Exchange Exchange Follow Following. Tech Encyclopedia.
0コメント